Rule Low Pro Automatic Pump 12 v. LP900S 900 gphMultiple modes of operation. The 900S features two automated modes of operation.
High or low water sensing mode. The pump starts when water reaches a 2” level. By turning the motor cartridge upside down, the sensor is at 1.3”
Electronic automatic mode. The pump automatically turnson every 2.5 minutes to check for water, and if it’s detected the pump stays on until the water is gone.
Fully rotating discharge body. The entire body swivels up to 180°, making the pump extremely easy to install.
Threaded discharge nozzle. Multiple ports are available for this pump.
¾” straight, ¾” right angle; 1”, 1-1/8”
All ports are included in the aftermarket package
Backflow prevention. New tricuspid check valves help prevent backflow.
Horizontal or vertical mounting. The 900S features a variety of mounting options to accommodate the boat’s design.
Rule’s LoPro Series Bilge Pumps are only 2.25”
high. The 900S model features two
automated modes. The first one engages
the pump when the water level reaches 2”
or 1.3” (user choice); and the second one
checks for water by briefly turning on the
pump every 2.5 minutes. The 900D model
requires a float and/or panel switch.