Awlgrip AwlCraft is a premium acrylic urethane topcoat paint. Awlcraft 2000 has a superior flow-out, higher gloss, and easier application than the original Awlgrip. It is fast drying to reduce dust entrapment, and can only be applied by spraying. This is an above the waterline only paint.
There are 60 Standard colors and any custom color you want available in both quarts and gallons. If you do not see what you want please call our Sales Office for assistance. If AwlGrip makes it we can get it!!
Mixing and Reduction Spray: mix by volume 2 parts Awlcraft 2000 Topcaot Base Component with one part Awl-Cat #2 Spray Converter to a smooth homogenous mixture. Reduce 25%-33% with the spray reducers appropriate for conditions. Overall mix is 2:1:3/4-1 by volume. 25% reduction is a standard mix. Clear coats, metallic colors, and painting in high temperature conditions may require additional reduction up to 40%.
Theoretical Coverage: Sq. Ft./Gallon: 573 Sq. Feet at one mil dry. 230 Sq. Feet at recommended dry film thickness
Calculated for mixed base and converter, reduced 25%.
Coverage calculations are based on theoretical transfer efficiency of 100%.
Actual coverage rate obtained will vary according to equipment choice, application techniques, part size, and application environment.
Recommended Wet Film Thickness: 6-9 mils (150-225 microns) total of 2-3 coats.
Recommended Dry Film Thickness: 2-3 mils (50-75 microns) total of 2-3 coats.
Anticipated Cure Time at 77 ¡ F, 50% R.H: 24 Hours to tape free; 3 days to light service; 14 days for full cure.
Recoatability: Spray applications consist of two to three coats applied over 1-4 hours.
Exact time will vary with temperature, project size, and film thickness applied.
VOC 472.5 g/lt or 3.9 lbs/gal (for base)